EH Smith

Keratwin K15/18 System

Keratwin K15/K18 System Characteristics:

The system is fixed in a non-rigid way to prevent clattering in case of wind

System Substructure:

Special clips allow for a non-rigid installation of the substructure
Grooves cut into the tile allow for excellence attachment of clamps and clips

System Advantages:

Reliable budget planning
Huge variety of colours available
Rapid and safe mounting
Available in two thickness'

Ø K15 panel: 15mm. Very low weight, only 25 kg/m2

Ø K18 panel: 18mm. Low weight, only 32 kg/m2

Rapid and safe mounting
Suitable for us on metal, masonry and wooden structures

System description

The facade panels KeraTwin K15 / K18 have dovetail grooves on the back into which at least four adapters per panel are pushed (symmetrical arrangement). A hang-on strap and a stainless steel spring are mounted on these adapters by means of a special tool. The KeraTwin panel is hung in prepunched vertical bearing profiles or in horizontally installed supporting rails with that.

The horizontal supporting rails are precisely fastened on the vertical substructure by using distance jigs. The adapter with hang-on strap and the adapter spring are parts of the systems K15 / K18. The stainless steel springs inserted in the adapter serve for the nonrigid installation. A profile put in the grooves, which is adjusted to the joint width, secures the position of the panels.

For more technical detail, please contact us .